• estrellas-ss-01.jpg
  • Orotavatal.jpg
  • PA0729-hr.jpg
  • playas-ss-03.jpg
  • senderos-ss-03.jpg
  • manrique-ss-03.jpg
  • naturaleza-ss-05.jpg
  • estrellas-ss-06.jpg
  • playas-ss-02.jpg
  • estrellas-ss-04.jpg
  • playas-ss-10.jpg
  • tenerife.jpg
  • lugares_encanto.jpg
  • naturaleza-ss-09.jpg
  • playas-ss-07.jpg
  • naturaleza-ss-07.jpg
  • playas-ss-04.jpg
  • vita-notturna-di-Tenerife-Las-Veronicas-club-discoteche.jpg
  • sunset-1337695_1920.jpg
  • senderos-ss-09.jpg

Newsletter

Flight

Organizing Committee

  • Elisenda-Pulido-Melin.png
  • foto_antonio.jpg
  • foto_eduardo.jpg
  • foto_nadal.jpg
  • foto_paulo.jpg
  • foto_vahid.jpg
  • IMG_Joaquin-2.jpg
  • Mario-Monzon.jpg
  • Zaida-Ortega.png

Congress Journals

2017 ScienceKNOW Conferences Ⓒ All Rights Reserved

GENERAL SCIENTIFIC PROGRAM (*)

(*) This program could be changed due to organizational issues

Wednesday, 19th July, 2017

Schedule

ROOM 1

ROOM 2

MAIN ROOM

14h30

Documentation delivery

15:00 – 15:10

Opening session

15:10-16:00

 

 

Plenary talk

Tapping into Ireland’s Agri-Food and Forestry Sectors for Bio-Based Polymers

Eoin Cunningham

School of Mechanical and Aerospace Engineering (SMAE) in Queen’s University Belfast

 

16:00 – 17:30

 

SUSTAINABLE MATERIALS

 

Potential of magnetic biochar composites for environmental and catalytic applications

K. Pospísková, Regional Centre of Advanced Technologies, Czech Republic

 

Magnetically responsive biological materials and their applications

I. Safarik, Biology Centre, ASCR, Czech Republic

 

Improvement of bio-sourced composites properties

E. Padayodi, ERCOS/UTBM, France

 

Crosslinking Chitosan with Natural Agents: Structure, Properties and Implications

H. Bianco-Peled, IIT, Israel

 

 

 

 

PROCESSING AND PRODUCT MANUFACTURING

 

Adhesive-free ultimate joining by water gas adsorption : Fundamental and application

Y. Taga, Chubu University, Japan

 

Microwave Absorbing Properties of Polyaniline-NiFe2O4:Cu composites

E. Sahin, İstanbul Technical University, Turkey

 

The effect of ethanol and non-volatile components on mass transfer of flavours: Experimentation and predictions for beer model solutions

A. Ammari, Wageningen University and Research, The Netherlands

 

 

 

MATERIALS IN RESEARCH

 

Preparation and modification of silver nanoparticles for enhance luminescence of rare-earth ions

B. Grobelna, University of Gdańsk, Poland

 

Assessment of efficacy of amended laterite soil as liner material in ash pond structures

M. Matsui, Gifu University, Japan

 

Spectral features of flavonols on plasmonic platforms

P. Bojarski, University of Gdańsk, Poland

 

A novel bactericidal material developed to reduce hospital-acquired infections

A.Piccitto, University College London, UK

17:30-18:00

 

Coffee-break

POSTERS SESSION

 

18:00 – 19:30

 

SUSTAINABLE MATERIALS

 

Layered-double hydroxides (LDHs) obtained from by-product of acid activation of vermiculite and composite vermiculite-LDHs adsorbents for removal of anionic and cationic pollutants from wastewaters

W. Stawinski, REQUIMTE/LAQV, Portugal

 

Amine base Vapor Phase Corrosion inhibitor Alternatives to Hydrazine for Steam generating system and Power Plants

B. Bavarian, California State University, USA

 

4-Chloro-1-naphthol and 4-methoxy-1-naphthol in NLO applications – theoretical considerations

I. Radkowska, Jan Dlugosz University, Poland

 

Carbon-Supported Organometallic Compounds as Electrocatalysts for the Cogeneration of Hydroxylamine and Electricity in a NO-H2 Fuel Cell

X. Sheng, KTH RIT, Sweden

 

PROCESSING AND PRODUCT MANUFACTURING

 

Processability of microcrystalline cellulose-polycaprolactone composites by 3D printing

M. E. Alemán, ULGC, Spain

 

STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

La-Ce-Co perovskite materials for selective aerobic alcohol oxidation

S. Carabineiro, Universidade do Porto, Portugal

 

Study of the microstructure and mechanical properties of human mitral chordae tendineae

D. Ferreño, University of Cantabria, Spain

 

The role of the orientation of the bone during bending test

D. Ferreño, University of Cantabria, Spain

Fluids transport in hydrogel ophthalmic materials based on free volume evolution

K. Chamerski, Institute of Physics, Faculty of Mathematics, Poland

 

 

 

 

MATERIALS IN RESEARCH

 

Synthesis and Fluorescence Properties of Novel Squarylium Boron

Y. Kubota, Gifu University, Japan

 

New plasmonic platforms for sensitive detection of medically active compounds

A. Synak, University of Gdańsk, Poland

 

Photochemical synthesis of noble metal nanoparticles and their application as optical nanoresonators

J. Krajczewski, University of Warsaw, Poland

 

 

 

Thursday, 20th July, 2017

Schedule

ROOM 1

ROOM 2

MAIN ROOM

9:00-9:45

 

 

Plenary Talk

Challenges of design for Functionally Graded Additive Manufacturing parts

Dr. Mario Monzón

Department of Mechanical Engineering

Universidad de Las Palmas de Gran Canaria

Spain

 

09:45 – 11:15

 

MATERIALS IN RESEARCH

 

Solution chemistry of alkaline formaldehyde-containing electroless copper plating solutions

E. Norkus, Center for Physical Sciences and Technology, Lithuania

 

Direct metal laser sintering of biomedical Co-Cr-Mo and Ti-6Al-4V alloys: microstructure and mechanical properties

G. Barucca, Universita Politecnica delle Marche, Italy

 

Electrochemical Control of Undetectable Fatigue Cracks

H. Cardenas, Louisiana Tech University, USA

 

 

 

Mesoporous BiVO4 thin films as efficient visible light driven photocatalyst

K. Ordon, Jan Dlugosz University, Poland

 

 

 

 

 

 

SUSTAINABLE MATERIALS

 

NOx oxidation by heterogeneous photocatalysis

E. Pulido Melián, ULPGC, Spain

 

Structure of alumina-supported Ni catalysts modified with ceria

S. Ivanova, Institute of Catalysis, Bulgaria

 

Agricultural waste as fillers in recycled polymer materials

E. Padayodi, ERCOS/UTBM, France

 

New sustainable polymeric formulations for its use in rotomoulding processes

A. Martínez-García, AIJU, Spain

11h15-11h45

 

Coffee-break

POSTERS SESSION

11h45 – 13h30

 

MATERIALS IN RESEARCH

 

Sublimation Synthesis and Deposition of High Performance Sorptive-photocatalytic Nanostructures on Fibres and Fabrics

R. Dvorsky, Technical university of Ostrava. Czech Republic

 

Structure and magnetic properties of phase-graded A1/L10-FePt films on amorphous glass substrates

G. Barucca, Universita Politecnica delle Marche, Italy

 

Ultrafast Non-Soliton Pulse Generation in Fiber Lasers with Graphene-Based Saturation Absorbers

H.-H. Kuo, National University of Kaohsiung, Taiwan

 

Tribological behaviour of eutectic coatings obtained by gas metal arc welding method with use of Fe-Mn-C-B-Si-Ni-Cr wire powder

M. Pashechko, Lublin University of Technology, Poland

 

 

SUSTAINABLE MATERIALS

 

Activated vermiculite as sustainable adsorbent for dyes and metal removal from single and multicomponet systems

W. Stawinski, REQUIMTE/LAQV, Portugal

 

Dechlorination technology of municipal solid waste or incinerator bottom ash by superheated steam

Y. Kato, Okayama University, Japan

 

Electrochemical Crack Repair in Concrete

H. Cardenas, Louisiana Tech University, USA

 

New sustainable PLA and PCL compounds for manufacturing 3D printing filaments

A. Martínez-García, AIJU, Spain

 

13h30

 

LUNCH-COCKTAIL

 

16:30-20:00h

 

TOURISTIC VISIT

 

 


Friday, 21st July, 2017

Schedule

Room 1

Room 2

Main Room

9h00

 

 

Plenary talk

Electromutagenic Strategies in Construction, Medicine and Space Exploration

H. Cardenas, Louisiana Tech University, USA

09h45 – 11h00

 

SUSTAINABLE MATERIALS

 

Regeneration of waste diatomite from palm oil production process as a support material for PCMs in thermal energy storage in buildings

K. Acurio, Escuela Politécnica Nacional, Ecuador

 

Some physicochemical properties of ionic liquids

J. M. Lee, Nanyang Technological University, Singapore

 

Analysing the effectiveness of Implementing Total Productive Maintenance in the South African Food Manufacturing Industry

P. Kholopane, University of Johannesburg, South Africa

 

 

STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

Effect of alloying elements on high temperature oxidation behavior of Ni-base superalloys

W. J. Nowak, Rzeszow Uniwersity of Technology, Poland

 

Positron annihilation and complementary studies of copper sandblasted at different pressures

P. Horodek, Joint Institute for Nuclear Research, Poland

 

Thermal Annealing Effects on the Structure and the Optical Properties of the Y2O3 Thin Films

E. Yilmaz, Abant Izzet Baysal University, Turkey

 

Spiropyran Polymeric Films as NLO Functional Materials

I. Radkowska, Jan Dlugosz University, Poland

 

 

11h00-11h45

 

Coffee-break

POSTERS SESSION

 

11h45 – 13h15

 

MATERIALS IN RESEARCH

 

Structural analysis of Ln4Al2O9 (Ln=Y, Sm, Eu, Gd, Tb) ceramics as thermal barriers for high-temperature applications

A. Morán-Ruiz, Universidad del País Vasco

 

Tribological behavior of TC4 alloy modified by High-frequency induction paste alloying technology

F. Ding, Nanjing University of Aeronautics and Astronautics, PRC

 

Analyzing Issues affecting food security at household level: Case study of South African rural areas

P. Kholopane, University of Johannesburg, South Africa

 

 

 

 

MATERIALS IN INDUSTRY

 

Study of the miscibility of ABS/PC polymer blends and investigation of the processing effect

S. Aid, Arts et Metiers ParisTech, Pimm Laboratory, France

 

High conversion chemical recycling, of PET for use in UPR and Advanced Composite Materials

R. Segura, RASE PROYECTOS PRODUCTIVOS, Mexico

 

Influence of Flaws in Recycled Aggregate on Mechanical Properties and Durability of Recycled Aggregate Concrete

G.-F. Peng, Beijing Jiaotong University, PRC

 

13h00-15h00

 

CLOSING COCKTAIL AND

MUSIC CHAMBERT MUSIC CONCERT

 


POSTER SESSIONS

TOPIC 1: MATERIALS IN RESEARCH

TOPIC 2: MATERIALS IN INDUSTRY

TOPIC 3: SUSTAINABLE MATERIALS

TOPIC 4: PROCESSING AND PRODUCT MANUFACTURING

TOPIC 5: STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

                                                                                                  POSTER SESSION 1

Wednesday, 19th July, 2017   18:30-19:00

Title

Author

ID

Topic

Low cost resistive sensors based on the convective self-assembly of chemically converted graphene

Diana Zaharie-Butucel

1022

1

Fabrication of plamonic substrate with controllable nano-gaps for DNA detection through SERS

Cosmin Leordean

1023

1

Influence of the E. coli and Bacillus cells on the zeta potential of RGO/TiO2/Ag nanocomposite in electrolyte and drinking water environment

Andrzej Olszyna

1041

1

Synthesis of highly efficient new plasmonic nanoparticles for SHINERS analysis.

Jan Krajczewski

1043

1

Preparation of Highly Porous Photocatalytic Nanostructure Containing Graphene Nanoparticles for Exciton Charges Delocalization

Richard Dvorsky

1053

1

Removal of Cd(II) using endocarp of açaí berries as biosorbent

Marcelo Campagnolo

1079

1

Removal of Cr(III) from contaminated water using chemically modified Brazil nut shell

Marcelo Campagnolo

1080

1

Use of modified Brazil nut shell for Cd(II) removal from waters

Dionir Briesch Junior

1081

1

Development of adsorbents from Brazil nuts wastes for Pb(II) removal

Dionir Briesch Junior

1083

1

PVA and PVP hydrogels mixtures for wound dressing: synthesis and characterisation

Marieta Muresan-Pop

1084

1

Removal of Pb(II) using endocarp of açaí berries as biosorbent

Daniel Schwantes

1085

1

Removal of Cr(III) by alternative adsorbents from endocarp açaí berries

Daniel Schwantes

1086

1

Development of adsorbents from crambe wastes for Zn(II) removal

Daniel Schwantes

1087

1

Hydration properties of shower gels with keratin hydrolysate

Mariola Mendrycka

1092

1

Hydration properties of washing-up liquid with collagen hydrolysate

Mariola Mendrycka

1093

1

The influence of collagen hydrolysates on the growth of opportunistic and pathogenic bacteria and yeasts

Mariola Mendrycka

1094

1

Synthesis, optimization and characterization of CoMoO4

Asma Chenchana

1107

1

Behavior of Wettability on hydrophobic surface prepared by thermal CVD using organic silane molecules with different alkyl chain length

Takahiro Ishizaki

1115

1

Three-phase contact line topology affected on ice formation

Sang Yun

1117

1

Design and synthesis of thermoresponsive alginate hydrogel and tuning their properties with ions

Sang Yun

1118

1


 

POSTER SESSION 2

Thursday, 20th July, 2017   11:15-11:45

Title

Author

ID

Topic

Platinum nanoparticles modified nickel-titania nanotubes as electrocatalysts for ethanol oxidation

Loreta Tamasauskaite-Tamasiunait

1120

1

Alloying Effects of Pd on Formation Temperature of Vanadium Hydride, V2H

Hiroshi Yukawa

1181

1

Effect of surface oxidation on hydrogen permeability through Pd-free vanadium metal membrane

Hiroshi Yukawa

1185

1

Electrochemical Wood Enhancement

Henry Cardenas

1208

1

Structural and Electrical Characterizations of Al/ZrSiO4/p-Si/Al Capacitors Deposited by RF Magnetron Sputtering Method

Ercan Yilmaz

1231

1

Experimental 3D printable hydrogel protocol: preliminary study

J. Blas Pagador

1238

1

Accuracy analysis of µ-extruded scaffolds using 3D bioprinting: a preliminary study

J. Blas Pagador

1242

1

Method of phosphorus biofertilizer obtaining based on phosphate rock solubilization by Bacillus megaterium strain

B. Cichy

1226

1

Thermal and fire properties of unsaturated polyester resin modified by flame retardant blend

Barbara Cichy

1035

2

Ecological Flame Retardants - Nanostructured Metal Sulfides On Carriers

Joanna Gluzinska

1090

2

Direct method of zirconyl nitrate production

Joanna Gluzinska

1104

2

High performance TopCoat for industrial, traffic and sanitary flooring applications.

Raul Segura

1137

2

Life cycle analysis of large microfluidic windows for sustainability building development

Almut Schmidt

1234

2

Enhancing polyfluorene photoluminescence through illumination

Ioan Botiz

1020

3

A study on environmental friendly utilization phosphogypsum

Barbara Cichy

1036

3

Early hydration of activated belite-rich cement

Martin Bohac

1054

3

Chemical activation of dicalcium silicate and its use for cement production

Theodor Stanek

1074

3

Alumina-supported RhNi catalysts for hydrogen production

Radostina Palcheva

1105

3

New Smart Composite Materials for Use in Rabbit Cages

Maria Velazquez

1134

3

Degradation Behavior of Polyethylene Terephthalate-co-glutarate (PTG) Films in Compost Condition

Chang Whan Joo

1147

3

Altering polyfluorene emission properties by convective self-assembly

Ioan Botiz

1180

3


 

POSTER SESSION 3

Friday, 21st July, 2017   11:00-11:45

Title

Author

ID

Topic

Alumina-supported RhNi catalysts for hydrogen production

Radostina Palcheva

1225

3

Is it possible to re-inject railway fastening parts with recycled short fiber glass reinforced polyamide?

Soraya Diego

1227

3

Processing and characterization of nitrates as phase change materials to evaluate its energy storage

Karen Acurio

1239

3

An overview of possibilities for river and reservoir sediment reuse in civil engineering

Natalia Junakova

1244

3

Alternatives of natural aggregates in concrete production industry

Natalia Junakova

1245

3

Effect of Ni and Sb Substitution on the Dielectric Properties Ba(Zn1/3Nb2/3)O3 Ceramics

Ethem Sahin

1159

4

Milling educational parallel robot

Marco Stipkovic Filho

1199

4

Comparison of different surface activation procedures to coat Ti6Al4V with bioactive compounds

M. Elena Alemán

1031

4

The effect of cerium on quick-set sol-gel silicates

Klara Magyari

1049

5

Novel PVA/Nanoparticulated Silicate Composite Hydrogels with potential as a multifunctional Wound Dressings

Adriana Vulpoi

1082

5

Fly ash as potential materials for synthesis of micro/mesoporous composites for mercury sorbents

Rafal Panek

1091

5

Mercury capture experiments from exhaust gas using silica porous material

Magdalena Wdowin

1095

5

Structural characterization of immobilized waste forms containing secondary waste from the liquid radioactive waste treatment

Mihaela Nicu

1100

5

Investigation on the chromium behavior on the structural and mechanical properties of AlCrxFeCoNi High Entropy Alloys

Victor Geanta

1101

5

Characterization of High-Entropy Alloys AlxCrFeCoNi and AlxCrFeMnNi filler materials

Victor Geanta

1102

5

Structural characterization of immobilized waste forms containing secondary waste from the liquid radioactive waste treatment

Laura Ionascu

1103

5

Zirconia nano-powder’s behaviour in simulated body environment

Adriana Vulpoi

1114

5

Preparation of activated carbon by chemical activation. Influence of different activating agents on the textural and chemical properties

Maria Alexandre

1249

5

Preparation and characterizacion of activated carbon from coconut shell. Its use in the adsorption of methylene blue and p-nitrophenol in aqueous solution

Maria Alexandre

1250

5

Improvement of Corrosion Resistance of Al alloy by Preparing of AlOOH/Layered Double Hydroxide Composite Film

Ai Serizawa

1121

5

Allotropic Grain Refinement of Vanadium for High Hydrogen Permeability and Strong Resistance to Hydrogen Embrittlement

Yoshihisa Matsumoto

1153

5

Structural Assessment Technologies Using Non-destructive Tests Based Stress Wave with ICT

Seung-Hun Kim

1177

5

Correlation between the chemical components of Eucalyptus wood

Sónia Carabineiro

1198

5

 GENERAL SCIENTIFIC PROGRAM (*)

(*) This program could be changed due to organizational issues

Wednesday, 19th July, 2017

Schedule

ROOM 1

ROOM 2

MAIN ROOM

14h30

Documentation delivery

15:00 – 15:10

Opening session

15:10-16:00

 

 

Plenary talk

Tapping into Ireland’s Agri-Food and Forestry Sectors for Bio-Based Polymers

Eoin Cunningham

School of Mechanical and Aerospace Engineering (SMAE) in Queen’s University Belfast

 

16:00 – 17:30

 

SUSTAINABLE MATERIALS

 

Potential of magnetic biochar composites for environmental and catalytic applications

K. Pospísková, Regional Centre of Advanced Technologies, Czech Republic

 

Magnetically responsive biological materials and their applications

I. Safarik, Biology Centre, ASCR, Czech Republic

 

Improvement of bio-sourced composites properties

E. Padayodi, ERCOS/UTBM, France

 

Crosslinking Chitosan with Natural Agents: Structure, Properties and Implications

H. Bianco-Peled, IIT, Israel

 

 

 

 

PROCESSING AND PRODUCT MANUFACTURING

 

Adhesive-free ultimate joining by water gas adsorption : Fundamental and application

Y. Taga, Chubu University, Japan

 

Microwave Absorbing Properties of Polyaniline-NiFe2O4:Cu composites

E. Sahin, İstanbul Technical University, Turkey

 

The effect of ethanol and non-volatile components on mass transfer of flavours: Experimentation and predictions for beer model solutions

A. Ammari, Wageningen University and Research, The Netherlands

 

 

 

MATERIALS IN RESEARCH

 

Preparation and modification of silver nanoparticles for enhance luminescence of rare-earth ions

B. Grobelna, University of Gdańsk, Poland

 

Assessment of efficacy of amended laterite soil as liner material in ash pond structures

M. Matsui, Gifu University, Japan

 

Spectral features of flavonols on plasmonic platforms

P. Bojarski, University of Gdańsk, Poland

 

A novel bactericidal material developed to reduce hospital-acquired infections

A.Piccitto, University College London, UK

17:30-18:00

 

Coffee-break

POSTERS SESSION

 

18:00 – 19:30

 

SUSTAINABLE MATERIALS

 

Layered-double hydroxides (LDHs) obtained from by-product of acid activation of vermiculite and composite vermiculite-LDHs adsorbents for removal of anionic and cationic pollutants from wastewaters

W. Stawinski, REQUIMTE/LAQV, Portugal

 

Amine base Vapor Phase Corrosion inhibitor Alternatives to Hydrazine for Steam generating system and Power Plants

B. Bavarian, California State University, USA

 

4-Chloro-1-naphthol and 4-methoxy-1-naphthol in NLO applications – theoretical considerations

I. Radkowska, Jan Dlugosz University, Poland

 

Carbon-Supported Organometallic Compounds as Electrocatalysts for the Cogeneration of Hydroxylamine and Electricity in a NO-H2 Fuel Cell

X. Sheng, KTH RIT, Sweden

 

PROCESSING AND PRODUCT MANUFACTURING

 

Processability of microcrystalline cellulose-polycaprolactone composites by 3D printing

M. E. Alemán, ULGC, Spain

 

STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

La-Ce-Co perovskite materials for selective aerobic alcohol oxidation

S. Carabineiro, Universidade do Porto, Portugal

 

Study of the microstructure and mechanical properties of human mitral chordae tendineae

D. Ferreño, University of Cantabria, Spain

 

The role of the orientation of the bone during bending test

D. Ferreño, University of Cantabria, Spain

Fluids transport in hydrogel ophthalmic materials based on free volume evolution

K. Chamerski, Institute of Physics, Faculty of Mathematics, Poland

 

 

 

 

MATERIALS IN RESEARCH

 

Synthesis and Fluorescence Properties of Novel Squarylium Boron

Y. Kubota, Gifu University, Japan

 

New plasmonic platforms for sensitive detection of medically active compounds

A. Synak, University of Gdańsk, Poland

 

Photochemical synthesis of noble metal nanoparticles and their application as optical nanoresonators

J. Krajczewski, University of Warsaw, Poland

 

 

 

Thursday, 20th July, 2017

Schedule

ROOM 1

ROOM 2

MAIN ROOM

9:00-9:45

 

 

Plenary Talk

Challenges of design for Functionally Graded Additive Manufacturing parts

Dr. Mario Monzón

Department of Mechanical Engineering

Universidad de Las Palmas de Gran Canaria

Spain

 

09:45 – 11:15

 

MATERIALS IN RESEARCH

 

Solution chemistry of alkaline formaldehyde-containing electroless copper plating solutions

E. Norkus, Center for Physical Sciences and Technology, Lithuania

 

Direct metal laser sintering of biomedical Co-Cr-Mo and Ti-6Al-4V alloys: microstructure and mechanical properties

G. Barucca, Universita Politecnica delle Marche, Italy

 

Electrochemical Control of Undetectable Fatigue Cracks

H. Cardenas, Louisiana Tech University, USA

 

 

 

Mesoporous BiVO4 thin films as efficient visible light driven photocatalyst

K. Ordon, Jan Dlugosz University, Poland

 

 

 

 

 

 

SUSTAINABLE MATERIALS

 

NOx oxidation by heterogeneous photocatalysis

E. Pulido Melián, ULPGC, Spain

 

Structure of alumina-supported Ni catalysts modified with ceria

S. Ivanova, Institute of Catalysis, Bulgaria

 

Agricultural waste as fillers in recycled polymer materials

E. Padayodi, ERCOS/UTBM, France

 

New sustainable polymeric formulations for its use in rotomoulding processes

A. Martínez-García, AIJU, Spain

11h15-11h45

 

Coffee-break

POSTERS SESSION

11h45 – 13h30

 

MATERIALS IN RESEARCH

 

Sublimation Synthesis and Deposition of High Performance Sorptive-photocatalytic Nanostructures on Fibres and Fabrics

R. Dvorsky, Technical university of Ostrava. Czech Republic

 

Structure and magnetic properties of phase-graded A1/L10-FePt films on amorphous glass substrates

G. Barucca, Universita Politecnica delle Marche, Italy

 

Ultrafast Non-Soliton Pulse Generation in Fiber Lasers with Graphene-Based Saturation Absorbers

H.-H. Kuo, National University of Kaohsiung, Taiwan

 

Tribological behaviour of eutectic coatings obtained by gas metal arc welding method with use of Fe-Mn-C-B-Si-Ni-Cr wire powder

M. Pashechko, Lublin University of Technology, Poland

 

 

SUSTAINABLE MATERIALS

 

Activated vermiculite as sustainable adsorbent for dyes and metal removal from single and multicomponet systems

W. Stawinski, REQUIMTE/LAQV, Portugal

 

Dechlorination technology of municipal solid waste or incinerator bottom ash by superheated steam

Y. Kato, Okayama University, Japan

 

Electrochemical Crack Repair in Concrete

H. Cardenas, Louisiana Tech University, USA

 

New sustainable PLA and PCL compounds for manufacturing 3D printing filaments

A. Martínez-García, AIJU, Spain

 

13h30

 

LUNCH-COCKTAIL

 

16:30-20:00h

 

TOURISTIC VISIT

 

 


Friday, 21st July, 2017

Schedule

Room 1

Room 2

Main Room

9h00

 

 

Plenary talk

Electromutagenic Strategies in Construction, Medicine and Space Exploration

H. Cardenas, Louisiana Tech University, USA

09h45 – 11h00

 

SUSTAINABLE MATERIALS

 

Regeneration of waste diatomite from palm oil production process as a support material for PCMs in thermal energy storage in buildings

K. Acurio, Escuela Politécnica Nacional, Ecuador

 

Some physicochemical properties of ionic liquids

J. M. Lee, Nanyang Technological University, Singapore

 

Analysing the effectiveness of Implementing Total Productive Maintenance in the South African Food Manufacturing Industry

P. Kholopane, University of Johannesburg, South Africa

 

 

STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

Effect of alloying elements on high temperature oxidation behavior of Ni-base superalloys

W. J. Nowak, Rzeszow Uniwersity of Technology, Poland

 

Positron annihilation and complementary studies of copper sandblasted at different pressures

P. Horodek, Joint Institute for Nuclear Research, Poland

 

Thermal Annealing Effects on the Structure and the Optical Properties of the Y2O3 Thin Films

E. Yilmaz, Abant Izzet Baysal University, Turkey

 

Spiropyran Polymeric Films as NLO Functional Materials

I. Radkowska, Jan Dlugosz University, Poland

 

 

11h00-11h45

 

Coffee-break

POSTERS SESSION

 

11h45 – 13h15

 

MATERIALS IN RESEARCH

 

Structural analysis of Ln4Al2O9 (Ln=Y, Sm, Eu, Gd, Tb) ceramics as thermal barriers for high-temperature applications

A. Morán-Ruiz, Universidad del País Vasco

 

Tribological behavior of TC4 alloy modified by High-frequency induction paste alloying technology

F. Ding, Nanjing University of Aeronautics and Astronautics, PRC

 

Analyzing Issues affecting food security at household level: Case study of South African rural areas

P. Kholopane, University of Johannesburg, South Africa

 

 

 

 

MATERIALS IN INDUSTRY

 

Study of the miscibility of ABS/PC polymer blends and investigation of the processing effect

S. Aid, Arts et Metiers ParisTech, Pimm Laboratory, France

 

High conversion chemical recycling, of PET for use in UPR and Advanced Composite Materials

R. Segura, RASE PROYECTOS PRODUCTIVOS, Mexico

 

Influence of Flaws in Recycled Aggregate on Mechanical Properties and Durability of Recycled Aggregate Concrete

G.-F. Peng, Beijing Jiaotong University, PRC

 

13h00-15h00

 

CLOSING COCKTAIL AND

MUSIC CHAMBERT MUSIC CONCERT

 


POSTER SESSIONS

TOPIC 1: MATERIALS IN RESEARCH

TOPIC 2: MATERIALS IN INDUSTRY

TOPIC 3: SUSTAINABLE MATERIALS

TOPIC 4: PROCESSING AND PRODUCT MANUFACTURING

TOPIC 5: STRUCTURE OF MATERIALS: CHARACTERIZATION AND TESTING

 

                                                                                                  POSTER SESSION 1

Wednesday, 19th July, 2017   18:30-19:00

Title

Author

ID

Topic

Low cost resistive sensors based on the convective self-assembly of chemically converted graphene

Diana Zaharie-Butucel

1022

1

Fabrication of plamonic substrate with controllable nano-gaps for DNA detection through SERS

Cosmin Leordean

1023

1

Influence of the E. coli and Bacillus cells on the zeta potential of RGO/TiO2/Ag nanocomposite in electrolyte and drinking water environment

Andrzej Olszyna

1041

1

Synthesis of highly efficient new plasmonic nanoparticles for SHINERS analysis.

Jan Krajczewski

1043

1

Preparation of Highly Porous Photocatalytic Nanostructure Containing Graphene Nanoparticles for Exciton Charges Delocalization

Richard Dvorsky

1053

1

Removal of Cd(II) using endocarp of açaí berries as biosorbent

Marcelo Campagnolo

1079

1

Removal of Cr(III) from contaminated water using chemically modified Brazil nut shell

Marcelo Campagnolo

1080

1

Use of modified Brazil nut shell for Cd(II) removal from waters

Dionir Briesch Junior

1081

1

Development of adsorbents from Brazil nuts wastes for Pb(II) removal

Dionir Briesch Junior

1083

1

PVA and PVP hydrogels mixtures for wound dressing: synthesis and characterisation

Marieta Muresan-Pop

1084

1

Removal of Pb(II) using endocarp of açaí berries as biosorbent

Daniel Schwantes

1085

1

Removal of Cr(III) by alternative adsorbents from endocarp açaí berries

Daniel Schwantes

1086

1

Development of adsorbents from crambe wastes for Zn(II) removal

Daniel Schwantes

1087

1

Hydration properties of shower gels with keratin hydrolysate

Mariola Mendrycka

1092

1

Hydration properties of washing-up liquid with collagen hydrolysate

Mariola Mendrycka

1093

1

The influence of collagen hydrolysates on the growth of opportunistic and pathogenic bacteria and yeasts

Mariola Mendrycka

1094

1

Synthesis, optimization and characterization of CoMoO4

Asma Chenchana

1107

1

Behavior of Wettability on hydrophobic surface prepared by thermal CVD using organic silane molecules with different alkyl chain length

Takahiro Ishizaki

1115

1

Three-phase contact line topology affected on ice formation

Sang Yun

1117

1

Design and synthesis of thermoresponsive alginate hydrogel and tuning their properties with ions

Sang Yun

1118

1


 

POSTER SESSION 2

Thursday, 20th July, 2017   11:15-11:45

Title

Author

ID

Topic

Platinum nanoparticles modified nickel-titania nanotubes as electrocatalysts for ethanol oxidation

Loreta Tamasauskaite-Tamasiunait

1120

1

Alloying Effects of Pd on Formation Temperature of Vanadium Hydride, V2H

Hiroshi Yukawa

1181

1

Effect of surface oxidation on hydrogen permeability through Pd-free vanadium metal membrane

Hiroshi Yukawa

1185

1

Electrochemical Wood Enhancement

Henry Cardenas

1208

1

Structural and Electrical Characterizations of Al/ZrSiO4/p-Si/Al Capacitors Deposited by RF Magnetron Sputtering Method

Ercan Yilmaz

1231

1

Experimental 3D printable hydrogel protocol: preliminary study

J. Blas Pagador

1238

1

Accuracy analysis of µ-extruded scaffolds using 3D bioprinting: a preliminary study

J. Blas Pagador

1242

1

Method of phosphorus biofertilizer obtaining based on phosphate rock solubilization by Bacillus megaterium strain

B. Cichy

1226

1

Thermal and fire properties of unsaturated polyester resin modified by flame retardant blend

Barbara Cichy

1035

2

Ecological Flame Retardants - Nanostructured Metal Sulfides On Carriers

Joanna Gluzinska

1090

2

Direct method of zirconyl nitrate production

Joanna Gluzinska

1104

2

High performance TopCoat for industrial, traffic and sanitary flooring applications.

Raul Segura

1137

2

Life cycle analysis of large microfluidic windows for sustainability building development

Almut Schmidt

1234

2

Enhancing polyfluorene photoluminescence through illumination

Ioan Botiz

1020

3

A study on environmental friendly utilization phosphogypsum

Barbara Cichy

1036

3

Early hydration of activated belite-rich cement

Martin Bohac

1054

3

Chemical activation of dicalcium silicate and its use for cement production

Theodor Stanek

1074

3

Alumina-supported RhNi catalysts for hydrogen production

Radostina Palcheva

1105

3

New Smart Composite Materials for Use in Rabbit Cages

Maria Velazquez

1134

3

Degradation Behavior of Polyethylene Terephthalate-co-glutarate (PTG) Films in Compost Condition

Chang Whan Joo

1147

3

Altering polyfluorene emission properties by convective self-assembly

Ioan Botiz

1180

3


 

POSTER SESSION 3

Friday, 21st July, 2017   11:00-11:45

Title

Author

ID

Topic

Alumina-supported RhNi catalysts for hydrogen production

Radostina Palcheva

1225

3

Is it possible to re-inject railway fastening parts with recycled short fiber glass reinforced polyamide?

Soraya Diego

1227

3

Processing and characterization of nitrates as phase change materials to evaluate its energy storage

Karen Acurio

1239

3

An overview of possibilities for river and reservoir sediment reuse in civil engineering

Natalia Junakova

1244

3

Alternatives of natural aggregates in concrete production industry

Natalia Junakova

1245

3

Effect of Ni and Sb Substitution on the Dielectric Properties Ba(Zn1/3Nb2/3)O3 Ceramics

Ethem Sahin

1159

4

Milling educational parallel robot

Marco Stipkovic Filho

1199

4

Comparison of different surface activation procedures to coat Ti6Al4V with bioactive compounds

M. Elena Alemán

1031

4

The effect of cerium on quick-set sol-gel silicates

Klara Magyari

1049

5

Novel PVA/Nanoparticulated Silicate Composite Hydrogels with potential as a multifunctional Wound Dressings

Adriana Vulpoi

1082

5

Fly ash as potential materials for synthesis of micro/mesoporous composites for mercury sorbents

Rafal Panek

1091

5

Mercury capture experiments from exhaust gas using silica porous material

Magdalena Wdowin

1095

5

Structural characterization of immobilized waste forms containing secondary waste from the liquid radioactive waste treatment

Mihaela Nicu

1100

5

Investigation on the chromium behavior on the structural and mechanical properties of AlCrxFeCoNi High Entropy Alloys

Victor Geanta

1101

5

Characterization of High-Entropy Alloys AlxCrFeCoNi and AlxCrFeMnNi filler materials

Victor Geanta

1102

5

Structural characterization of immobilized waste forms containing secondary waste from the liquid radioactive waste treatment

Laura Ionascu

1103

5

Zirconia nano-powder’s behaviour in simulated body environment

Adriana Vulpoi

1114

5

Preparation of activated carbon by chemical activation. Influence of different activating agents on the textural and chemical properties

Maria Alexandre

1249

5

Preparation and characterizacion of activated carbon from coconut shell. Its use in the adsorption of methylene blue and p-nitrophenol in aqueous solution

Maria Alexandre

1250

5

Improvement of Corrosion Resistance of Al alloy by Preparing of AlOOH/Layered Double Hydroxide Composite Film

Ai Serizawa

1121

5

Allotropic Grain Refinement of Vanadium for High Hydrogen Permeability and Strong Resistance to Hydrogen Embrittlement

Yoshihisa Matsumoto

1153

5

Structural Assessment Technologies Using Non-destructive Tests Based Stress Wave with ICT

Seung-Hun Kim

1177

5

Correlation between the chemical components of Eucalyptus wood

Sónia Carabineiro

1198

5

 

Registration

For submitting your abstract, please follow the online registration link
If you had already registered send your abstract here

Members of the Organizing Committee belong to the following institutions

Technical and logistic assistance from:
ScienceKNOW Conferences, Address: Jose de Manyanet Square, E06006 Badajoz, Spain, EU.
VAT number: E06678379. Registered in Spain, EU.
E-mail: info@scienceknowconferences.com. Phone: +34 656405239, +351 916365238